OMC Stringer Transom Seal Boot 22 Hole Rubber Boot Or Bellow Seal (1978-1986)

Description

THANK YOU VERY MUCH FOR YOUR ATTENTION TO OUR SHOP .
NEW BRAND'S TRANSOM RUBBER BELLOW SEAL BOOT
Part:
909527
22 Holes Transom Rubber Gasket Seal
Please Check the picture 2 ,  the Seal Just have two models ,
One seal holes are 22,
another model holes are 16 .
If
your Boat Engine Transom Rubber Seal Holes are
22, buy it !
If your Boat Engine Transom Rubber Seal Holes are 16, You can find it from our store .
How To Change & How Hard ?
Many Guys said they are seal just can be used for fresh water , because the original seal material is NBR , but we have changed the material to be CR , so it can be used for Sea Water and Fresh Water .
Step 1 、You Should have a new transom seal in your hand  and really fit to your Boat , because we will lost our boat if without Boot ;
Step 2 、Took it off easy way it that CUT the old rubber seal ;
Step 3 、NOT NEED TO TAKE OFF THE DRIVE IF YOU ONLY WANT TO REPAIR SEAL ;
Step 4、 Use a little SOAP on the boot seal  to help it slip over the drive with a little care ;
Step 5 、USE GOOD SEALANT FOR SEAL .
OK , USE YOUR STRONG ARM TO STRETCH THE SEAL GET TO THE SCREW HOLES AND ALIGN IT A BIT BETTER !