Kingston HyperX 1GB DIMM 800 MHz DDR2 SDRAM Memory (KHX6400D2LLK2/2GN)

Description

KHX6400D2LLK2/2GN
DESCRIPTION
Kingston’s KHX6400D2LLK2/2GN is a kit of two low-latency
128M x 64-bit 1GB (1024MB) DDR2-800 CL4 SDRAM
(Synchronous DRAM) memory modules that are NVIDIA®
SLI™-Ready. Both modules are based on sixteen 64M x
8-bit DDR2 FBGA components. Total kit capacity is 2GB
(2048MB). Each module pair has been tested to run at DDR2
800MHz at low latency timing of 4-4-4-12 at 2.0V. The SPD
is programmed to JEDEC standard latency 800Mhz timing of
5-5-5-15-2T at 1.9V. Each 240-pin DIMM uses gold contact
fingers and requires +1.8V. Modules are intended for use
with NVIDIA® SLI™ certified solutions. The electrical and
mechanical specifications are as follows:
SPECIFICATIONS
Clock Cycle Time (tCK) CL=5 3ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 54ns (min.)
Refresh to Active/Refresh 105ns
Command Time (tRFC)
Row Active Time (tRAS) 39ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.922 W (operating per module)
UL Rating 94 V - 0
Operating Temperature 0° C to 55° C
Storage Temperature -55° C to +125° C
These units are PULLS from a working system and are being sold AS-IS, NO RETURNS.