Honda designed motor engine z50 crf50 50cc z-50 xr50 crf 50 kit

Description

Brand new Top quality replacement for the Honda Standard
New Honda designed 50cc Replacement Engine Kit.
This engine will serve as a replacement engine for your Honda Z50, XR50,CRF50 minitrail, monkey bike,CT50 or any other ride needing a Honda designed Bolt in. or if you have a custom project in mind, these little engines are hard to beat.
This Kit includes a Brand New ,
Not
rebuilt or reconditioned 49cc SOHC electric start four-stroke engine.
The engine is fully assembled, with exception of the intake and carburetor, and sprocket side cover, these can be  installed in a matter of just a few minutes.
All the bolt holes and Mounting holes are the same as all Honda engine, exhaust, foot peg mounts, engine mounting bosses included.
This is a brand new reproduction of Honda's z 50 Motor.
Maintenance free automatic cam chain tensioner.
Automatic clutch with unicycle 2-speed transmission Std.
Can be upgraded to 3 or 4 speed, with the stock Honda parts.
13 mm Mikuni carburetor,
kick start lever, and electric start standard
Trouble free CDI pointless ignition
CDI, Coil, and Regulator all included
Don't want or need the Electric start, would you rather use your intake and Carb? ..... Not a problem, ask me how before bidding.
·
Wiring diagram included depicting wiring
with
and
without
the battery and charging system, should you wish to keep it simple, or upgrade your project.
·
General Engine Specifications:
Type:     4-Stroke single-cylinder OHC air cooled
Bore & Stroke:     39 X 41.4mm
Compression ratio:     8.8 : 1
Displacement:     49.5cc
Idle:      1,500 rpm
Lubrication:     Pressure / Splash
Oil capacity:     .8L (10w-30)
Fuel consumption:     154 mpg (aprox.) 1.52L/100km
Weight:      45 pounds
Overall approx measurements:     17" x 10 1/4" x 8 1/4"
Mounting is the same as the Honda z 50cc and 70cc Motors found on a multitude of different small machines.
. Note: This complete engine retails for over 0. If your engine is tired consider that, the parts to rebuild a z 50 costs could easily be over the cost of this engine,
While this little engine shares all the same bolt patterns with the Honda 50cc and 70cc engines these were originally speced for the little Husky 50cc four wheeler built by IPC.  Built By one of two leading ISO 9001 based MFG. The quality is assured due to this affiliation. and was required as a result of this OEM American Based companies pending acquisition of their own Quality control standard.
Several
folks have retrofitted them into many other applications for small displacement rides built by Honda, Yamaha, Suzuki, Kawasaki, Polaris, Husky, Eton  so if you have a little ATV, ATC, or Dirt bike, you might wish to consider retrofitting this little engine in if yours is in need of work or replacement. specifically , these engines share the same bolt configuration with the following model numbers, but I'm sure there are many others I have not covered.  Z 50 z50 z-50 70 ct70 ct-70 cl70 cl-70 cl CRF-50 The carb and intake assembly are a bit longer than the little stock z50 please keep this in mind, however it is generally a simple task to compensate for that, should that be a concern. Please note, if you wish to retrofit this little engine into a ride that might differ from the Honda mounting configuration, some fabrication might be required.   My teenage son  has successfully installed a few of these and has required very little assistance from me, so it really ain't all that tough.
I have a good stock of spare parts as well.
Shipping will be by ground UPS. To any of the Lower 48 States only Auction must be paid in full within five days of the end of auction. I can accept PAYPAL or I’ll accept a personal check  (I’ll ship as soon as the check clears). Good luck with your bid, and thanks for looking