Car Blind Spot Monitoring Radar Detection System w/ Bevel Protractor Radar Line

Description

Store category
You may also like
Description
Introduction:
1.Thanks for choosing the blind spot monitoring lane-merging assistant driving system produced by our company. The product is composed of two 77Ghz millimeter wave radars, two indicators (or special vehicle blind-spot-type rear view mirror), one buzzer and connecting harness.
2.This system product will produce the pre-warning to the hazardous targets on both left and right adjacent lanes.
3.This system includes the four functions of BSD,LCA,RCT and AOA.
4.Its unique capacities of penetrating the smoke, fog and dust can realize the all-weather and all-time application,as well as detect the speed, angles and relative movement for 32 objects.
5.It is able to detect the target as far as 50 meters at maximum, and finally output the warning signals. The warning signals include the Level 1 Warning and Level 2 Warning.
Function Description:
Level 1 Warning: Indicator lamp is always on
Level 2 Waming: Indicator lamp flashes+Buzzer emits prompt tone
1.BSD Blind Spot Pre-warning (Detection range: Horizontally 4 meters, longitudinally 15 meters)
Working Logic: Vehicle's own speed is higher than 10Km/Hour BSD pre-warning mode is started:
A. If the target object enters the radar signal area with the
faster speed (the turn signal lamp of this vehicle is not turned on), it will produce the Level 1 Warning until the target object leaves the monitoring area,and the warning is canceled.
B.If the target object enters the radar signal area with the faster speed (the turn signal lamp of this vehicle is turned on),it will produce the Level 2 Warning until the target object leaves the monitoring area, and the warning is canceled.
2. LCA Vehicle Approaching Pre-warning (Detection range: Horizontally 4 meters, longitudinally 50 meters)
Working logic: Start after powering on, the target object enters the alarming range and the relative collision time<3.5 seconds, LCA vehicle approaches the pre-warning mode is started:
A. When the target object enters the alarming scope (the turn
signal lamp of this vehicle is not turned on), it will produce the Level 1 Warning until the target object leaves the alarming area, and the warning is canceled;.
B. When the target object enters the alarming scope (the turn
signal lamp of this vehicle is turned on), it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.
3.AOA Overtaking Pre-warming (Detection range: Horizontally 4 meters, longitudinally 15 meters)
Working logic: Vehicle's own speed is higher than 10km/Hour, AOA overtaking pre-warning mode is started:
A. This vehicle positively overtakes the other vehicles with
speed and the target object is within the alarming scope, it will produce the Level 1 Warning until the target object leaves the warning area, and the warning is canceled.
B. This vehicle positively overtakes the other vehicles with
speed, the target object is within the alarming scope and the turn signal lamp on the corresponding side is turned on, it will produce the Level 2 Warning until the target object leaves the alarming area,and the warning is canceled.
4. RCT Reversing Pre-warning (Detection range: Horizontally 5 meters, longitudinally 5 meters)
Working logic: Put into R (reversing gear), RCT revering pre-warning mode is started:
When the target object enters the alarming scope, it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.
Specifications:
Working voltage:10-36V
Working frequency band:77-81Ghz
Working temperature：-40℃ ～ +85℃
Power consumption：< 2W
Water-proof level：Ip67
Distance resolution ：0.5m
Range accuracy ：Superior to 0.18m
Detection distance ：50m
Transceiving antenna: double send and four receive
Radar chip: TI
Microcontroller chip: ST
Block the third lane: yes√ yes
Same speed follow warning: √ yes
B-pillar warning: No
BSD blind spot monitoring: √ yes(start at own vehicle speed>20Km/hour)
LCA lane change assist: √ yes(start at own vehicle speed>20Km/hour)
AOA overtaking warning: √ yes(start at own vehicle speed>20Km/hour)
RCTA reversing warning: √ yes(5 meters, start with reverse gear)
The package:
77Ghz millimeter wave radar*2
In-vehicle pre-warning indicator*2
Power line with buzzer*1
Power extension line （5M）*1
Extension line of indicator lamp*2
Radar line*1
Mounting bracket *2
Cable tie *Several
Standby double-sided adhesive tape *2
Adhesion promoter *4
Bevel protractor*1
Instruction Manuel*1
Installation diagram, circuit connection diagram, installation method and precautions please see the description in the picture
Suggestion:
1. It is recommended that the installation be carried out by professionals.
2. The installation angle of radar will affect the detection distance and effect. Please install it strictly according to the instructions.
3. Rainstorm weather may affect the detection distance and effect.
4. Moving objects approaching 3M behind the vehicle may not be monitored.
5. Because of manual measurement, there may be a change of 1-3 mm (cm).
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Payment
Delivery details
return policy
feedback
Contact us
Payment
1.
We accept payment via We accept payment via We accept payment via Credit Card、Debit Card、Apple Pay、Google Pay or PayPal etc.
2. Payment must be made within 4 days of auction closing. or an unpaid case will be open on ebay automatically.
3. Please contact us by ebay message to note your special requests (color, packages, etc.) immediately you paid for the order.
Shipping
1. We arrange the shipment from Monday to Friday. Shipping fee includes packaging and handling fees.
2. Items will be send as our promise handling time after Payment Verified (Available on business days only).
3. Please check your ebay shipping address before payment, and make sure it contain a valid phone number Because almost all shipping request phone number,
we may hold the order if phone number is missing
.
4. If the item is from China, Tax is buyer's responsibility, we can declare a low price to reduce or avoid customs tax, but we don't take responsibility if buyer don't clear the customs
.
}}
Return
1. Please freely contact us to find solution by ebay message before you open a return/case. Communication always is best way to solve problem.
2. We accept any return in 30 days that we promise.
3. If buyer return it just because buyer don't like it or bought a wrong item, it is buyer pay for return shipping fee.
4. If item is defect or wrong when it. we will pay for the shipping fee after buyer show the shipping invoice.
5. Please never return the parcel without agreement
, if you don't get RMA NO. from us, it is no possible for us to get the parcel. and we will take no further auction for the return.
Feedback
1. We will automatically leave positive feedback to every buyer who completed the transaction.
2. As you know feedback is important for all seller. We at strive to give all of our customers a 5 star service.
3. If you receive the product ordered within a reasonable time, Please leave us a 5 star rating for each of the (DSR). As this helps us maintain a quality service.
4. If you're not satisfied with our goods or service, Please freely contact us by message.Communication is very important, we believe we can resolve all the problem with you.
Contact us
1. It's our pleasure to answer any questions you have. Please send us a message through eBay and allow 24 hours for reply
2. Our working time: 9:00 AM - 18:30 PM (Beijing Time GMT+8 ), Monday - Friday. (weekend and holidays excluded).
On Aug 28, 2022 at 19:51:05 PDT, seller added the following information: